Muc Off Hey Dipstick

• Aircraft grade CNC machined 6063 aluminium
• Knurled handle gripper
• Durable 304 Stainless Steel dipstick with machined sealant level indicator grooves 
• Lightweight

Directions for use:

1. Ideally use with our Big Bore valve range for super simple pre ride sealant checks. Ensuring your tyre is not on the ground to make sure you get the correct reading (ideally put your bike in a workshop stand before starting), rotate the valve to the 6 o’clock position and wait a few minutes for the sealant to form in the base of the tyre. Now open the lever on the valve and slide the ‘Hey Dipstick!’ down inside the valve and inside the tyre until it touches the bottom (if using a regular Presta valve you can remove the core and carry out the same procedure).
2. Now simply pull out and you can see the health of your sealant instantly.
3. If your sealant is drying out or the level looks low, then simply add more sealant.
4. If it’s completely dried out, then clean out the tyre using our Sealant remover spray and add a fresh serving of sealant. 
5.  If you are using Big Bore valves now simply re inflate your tire to the desired pressure. If using Presta valves, then reinsert the valve core and do the same.

Tip! Check the level using the dipstick when you first set up your tyres with sealant so you know the correct level your sealant should be, now mark the dip stick with a marker pen so you know what level it needs to be on each subsequent check and top up as needed.